Fenton Pool Dual-Surface Agitator Selection Method

GSJ-500 Double-Surface Blender

Duwan Suspended Double-Curved Mixing Vessel

Duwan Double Concave Blender, primarilyJob Characteristics: 

A unitized mixer and aerator, or a standalone mixer

Design is reasonable, energy consumption saved

3 Suitable for large, medium, and small-scale industrial wastewater treatment; low investment required

Excellent processing results, long service life

Made of PE or glass fiber reinforced plastic, steel material, etc., enhanced corrosion resistance of the equipment.

Simple structure, easy to manage.

Dual-curved mixer working principle and structure

The upper surface of the bi-convex impeller body is a bi-conic profile rotating around the axis of the impeller body, forming a bi-convex structure. Its unique impeller design maximizes the combination of fluid characteristics with mechanical motion. The equation of the hyperbola isThe xy=b curve rotates around the y-axis to form a surface solid; to accommodate water flow, the design draws water from the center of the impeller, which on one hand reduces water turbulence and on the other hand ensures uniform pressure on the impeller surface, thereby maintaining the overall balance of the unit during movement. There are eight guide vanes evenly distributed on the involute double-arc surface. Utilizing the potential energy obtained from additional water intake due to the self-weight pressure of the liquid and the centripetal force generated by the impeller rotation, the liquid moves tangentially along the circumference of the impeller under the action of gravitational acceleration through the double-surface structure. With the reflection of the pool wall, it forms a recirculating water flow from top to bottom, thus obtaining cross-flow in both the axial (y) and radial (x) directions (as shown in Figures 1 and 2). It is due to the structural characteristics of the vertical turbine mixer impeller and its proximity to the bottom installation that its working position determines its direct anti-settling effect on suspended particles, achieving an ideal mixing effect during operation and effectively eliminating dead mixing spots. A large specific surface area enables a large-scale water exchange.

The impeller structure is composed of a guide fluid component, mixing parts, and transmission sections.

Maintenance of the dual-curved mixer

Double-Sided Curved Blender Maintenance Tips

1、Bearing oil temperature rise, stop the machine immediately to investigate and eliminate the cause.

2、Pay attention to the degree of wear on parts prone to wear, and always be ready to replace worn-out components.

3、The bottom plate of the double曲面 mixer where the activity device is placed should be free of dust and other debris to prevent the moving bearing from failing to move on the base plate when the machine encounters uncrushable material, which could lead to a serious accident.

4. The shaft bears the full load of the machine, so proper lubrication is crucial for the bearing's lifespan, directly affecting the machine's service life and operational efficiency. Therefore, it is essential that the lubricating oil injected be clean and the seal must be well-sealed.

5. Newly installed wheel hubs are prone to loosening and should be checked regularly.

6. Ensure that all parts of the machine are functioning properly and check for any signs of overcurrent in the motor.

7. If there is a knocking sound when the gear is in operation, stop immediately, inspect, and eliminate it.

 The difference between the dual曲面 mixer (vertical mixer) and other mixing equipment lies in:

      1Due to the fluid conditions approaching ideal, the energy consumption is relatively low.

      2Due to the high flow rate of water within the pool, sludge will not settle.

      3The mixer can self-correct during operation, ensuring the downward force is vertical, thereby preventing unbalanced movement.

      4Omni-directional flow, ensuring even mixing in all areas of the pool without dead spots.

      5No easily damaged parts underwater, allowing for simple and convenient access to the variable speed motor for maintenance.

      6No corrosive materials are used; both the mixing disk and the mixing shaft are made of high-grade anti-corrosion materials.

      7Exquisite overall. Continuous improvements ensure long-lasting use and sturdy, durable quality.

      8No clogging issuesSealed. Unlike horizontal flow-through mixers, it does not carry any material on the mixing body.

Dual curved, equivalent to 304Leave space inside the stainless steel field control cabinet.PLCThe system's connected terminal blocks are clearly labeled, and complete control drawings are provided for implementation.PLCAutomatic control.

Inverter Configuration Instructions

Variable frequency drive adoptsABB ACS880SchneiderATV630SiemensMM440Core components use imported brands. Variable frequency inverters require compatibility withPLCConnection control.