Duwan Environmental LSSF-355 LSSF-420 Sand and Water Separator, with Installation and Commissioning Included

Jiangsu Du'an Environmental ProtectionLSSFThe molding sand water separator is a comprehensive design based on the usage of similar products both domestically and internationally. Design-in, solving the inconvenience of strap replacement and spiral

Defects with non-adjustable axial positions, characterized as follows:

1 Separation efficiency up to96%~98%Separable to particle size ≥0.2mm The particles;

2 Axleless Spiral,Oil-free bearing,Easy maintenance;

3 Tightly structured,Lightweight;

4 New Transmission Device,Key components--The reducer is an advanced shaft-mounted type.,No shaft couplings required

Appliance,Easy installation alignment;

5 Strap is quick-release type,Easy to replace;

6 Adjustable helical axial position,Easily adjustable safety gap at the tail and box wall.

Jiangsu Du'an Environmental ProtectionLSSF-320Sand and water separatorConstruction and Operation Process：

Helical sand and water separator, featuring a shaftless helix, liner strips,U Composed of moldings, water tanks, flow guides, overflow weirs, and driving units.

Sand hydrates are introduced into the water tank from the top of one end of the separator. The heavier mixture, such as sand particles, settle at the bottom of the trough. Under the push of the spiral, the sand particles are lifted along the inclined bottom of the trough. After leaving the liquid surface, they continue to move a distance further. Once the sand particles are fully dehydrated, they are discharged into a sand bucket through the sand outlet. The water separated from the sand is then drained out through the overflow and sent to the factory's water storage pond.

Order Requirements for Spiral Sand and Water Separator

1Please specify the full name in accordance with the model representation method.

2Usage Environment (indoor, outdoor, and others)

3If a reinforced concrete water tank is used, engineering design documents for the relevant sections should be provided.

Sand and water separatorAccessory Equipment:

304Stainless steel flanges, inlet piping, outlet piping, and on-site control box

Sand and Water Separator,Specifically, it is used for the separation of sand and water in wastewater treatment.,Environmental protection equipment technology field.It includes a swirl sedimentation tank and a sand-water separation tank.,Gas-lift pump passes through the main shaft into the sand hopper at the bottom of the vortex sedimentation pool..Pilot shaft connects to the impeller assembly.The sand-water separation pond is equipped with a spiral elevator.,Sand-water separator surface fixed collecting trough,Water collection trough connects to the drip board at the bottom..Water collection tray one end connected to the energy dissipation panel,Energy-absorbing plate top fixed swirl separator.The upper end of the vortex sedimentation tank is connected to the upper outlet and inlet of the vortex separator respectively through an overflow pipe and a row of sand pipes..The vortex sedimentation tank is equipped with an inlet along the tangential direction.,An internal Doppler flow velocity meter is installed in the inlet..This utility model is used for separating sand and water in wastewater treatment.,Automatic adaptation to fluctuations in water inflow,High separation accuracy,Excellent separation effect.