ZJ-1200 Pitched Propeller Blender with Double-Sided Propeller and Variable Frequency Motor
Vertical Medication Blender, Mixing Blender, Medication Blender
Technical Description of Propeller Type Agitator
·The paddle mixer is installed in the sludge balance tank of the wastewater recovery system, used for uniform sludge sedimentation in the balance tank.
Avoid dead corners.
Product Range
· The paddle mixer provided should be a complete set, including guide rods, a 10m underwater cable, etc., effective and safe accessories.
All necessary accessories for full operation, capable of both on-site manual control and remote automatic control.
·All installation, fixing, and connecting bolts, etc., accessories.
·Random spare parts, special tools, installation and debugging, and maintenance manuals.
·Installation diagrams, user manuals, certificates of compliance, and packing lists, etc.
Duwan Environmental Eco-Paddle Stirrer Factory Information Submission:
Performance Test Report
Propeller mixer layout, equipment foundation plan
Paddle mixer weight
Component electrical control schematics
Field test procedures, operational guidelines, installation and usage instructions, and other technical documentation.
Tilting paddle mixer main equipment performance requirements
Working Conditions:
The propeller mixer can operate continuously under the following conditions.
In sludge containing inorganic sand;
Medium temperature not exceeding 40℃；
Medium pH value between 5-9.
Liquid density does not exceed 1500Kg/m3；
Extended dive operations, dive depth generally does not exceed 10m；
Duwan Environmental ZJ-1200 Folding Prop Stirrer Basic Requirements for the Matching Control Box
A.2.1 On-SiteThe electrical components within the control box must meet the rated breaking capacity requirement of ≥50kA. All electrical control systems inside the box should operate safely, be reliable in action, and switches, buttons, indicator meters should comply with remote/local control requirements.
A.2.2 Component Requirements:
Molded Case Circuit Breaker: Made in China, breaking capacity 50kA.
Miniature circuit breakers: Made in China
Contactor: Made in China
Thermal Relay:
Start/Stop Button and Indicator Light: Domestic.
Terminal block: Domestic.
Installation, debugging, and acceptance of all electrical components must meet the requirements.
A.2.3 All on-site control boxes/cabinets are made of 304 stainless steel, with a thickness of not less than 2mm, and equipped with stainless steel door handles on the box/cabinet doors.
A.2.4 The cabinet door locks should be uniformly selected as corrosion-resistant and sturdy alloy locks. The outer lock should be a keyed lock, while the inner lock should be a convenient lock. The keys for the same type of lock should be identical. The control cabinet panel must also have a sealed cover with an observation hole covering the indicator lights and buttons, etc., which can be locked to prevent moisture from rain from affecting the components. Silicon rubber sealing rings should be used.
A.2.5 Protection grade of the 2.5 control box: Indoor not less than IP54, outdoor not less than IP56.
A. 2.6 Color Identification of Electrical Equipment
Electrical equipment housings are available in silver color. Materials include spray-painted or 304 stainless steel.
AmongstButton and indicator light usage should comply with the relevant regulations in IEC 60073.
