Jiangsu Du'an WDS100-160 Horizontal Centrifugal Pipeline Pump

Horizontal Centrifugal Pump CAD Installation Drawing

Product Pump Variable Frequency Control

Flow Rate: 100 cubic meters per hour

32-meter lift height

Motor Power: 15 kW

Impeller speed: 2900 RPM

Cast Iron

Variable Frequency Drive Motor

Duwan WDS100-160Single-stage centrifugal pipelinePump rated parameter tolerances, vibration intensity during normal operation, noise values, etc., should all comply with the standard specifications required by the product. Distance from the pump1 Noise level at 3 meters below85dBVibration values meetStandard Requirements。

WDS100-160Single-stage centrifugal pipelinePump coating and quality meet the standards of the Ministry of Mechanical and Electrical Engineering, no additional information provided.WillPeeling paint, dents, bulges, and hard scrape marks on the exterior.Phenomenon.Surface painting as perThe equipment itselfStandard colors: Pump in silver, motor in apple green, motor cover in yellow, motor cover with red directional mark, coupling guard in yellow.

WDSSingle-stage centrifugal pipelineThe pump operates smoothly without any sticking or hesitation. All exposed rotating parts are equipped with detachable protective covers.

WDSSingle-stage centrifugal pipelinePump main materials：

Pump Housing:Cast IronOr equivalent

Propeller:Cast IronOr equivalent

Spindle:Cast IronOr equivalent

Abrasion-resistant lining:Cast IronOr equivalent

Shaft Seal: Mechanical Seal

Manufacture, inspect, test, and accept

（1Each pump must pass inspection and testing, and be accompanied by a product certification and user manual before it can be shipped.

（2Material testing should include chemical composition tests, mechanical property tests, non-destructive tests, etc.

（3Pump testing and inspection include:

a.Water Pressure Test

Pressure-bearing parts(Pump bodies, pump covers, and sealing end caps, including fasteners)The test pressure should be equal to the basic design pressure.1.5 Double the hydrostatic test pressure. The test should be conducted using cold, clean water, and the pressure should be maintained for at least10 Minute, no visible leakage.

b.Performance Test

·Hydraulic testing andNPSH Tests should be conducted according toJB3562 Standard procedures

·Vibration test as perJB/TQ380 Standard procedures

·Noise test conductedJB/TQ381 Standard procedures

·Inspect bearing temperature<80℃

·Leakage Test of Sealed Containers

c.Inspect

·Inspection of Components Before Assembly

·Internal inspection of the pump body and sealing ring after trial operation

·Dimension inspection for installation

·Inspection of auxiliary piping and other accessories

·Overall appearance inspection(Including label data, surface paint, packing list, random documents, and accessories.) ·Operational status inspection(Including steering)

Jiangsu Du'an Environmental ProtectionWDSHorizontal CentrifugalPump factory-fittedMaterials：

Country of Origin, Equipment Manufacturer, and Full Name of Manufacturer

Form, model, specifications, external dimensions, technical performance, and relevant parameters of the equipment

Basic bolt layout detail and civil load

Pump assembly general layout drawing

Pump Assembly Structural Diagram

Detailed technical specifications

Part Material and Protective Coating Description

Dimensions and space requirements for the equipment's shape, installation, and maintenance operation.

Electrical schematic diagrams and terminal wiring diagramsØ Control Schematic

Manual or Equipment List

Centrifugal Pump Technical Data Sheet

Supplier List (including name, quantity, specifications, performance parameters, material, origin)

Installation, operation, and maintenance manuals for equipment (provided after contract signing)