Motor Winding Overheat ProtectorINT69 Key Performance：
Sensor Power Supply:
SensorDC12V powered.
Power supply transformer isolation.
Signal Input:
Overtemperature Signal for Winding: Overtemperature Protection for Motor Winding
Input Error Control±2% 。
Signal Input:DC12V switch signal input or resistance/current signal input.
Signal Response Speed:10mS。
Signal Output：
Relay Output Contact Rating:5A/250VAC or 5A/30VDC.
Winding Fault Output: One set of relays is normally open, and another set is normally closed output.
Power and Fault Indicators: Power Indicator (Green) Light.
Winding Fault Indicator (Red) Light
INT69 Motor Thermal ProtectorProduct Description:
Input Voltage:AC 220V ±5%, 50Hz, rated power consumption less than 5W.
Ambient Temperature:-20℃～75℃。
Ambient Humidity:Less than 90% (no dew condensation).
Dimensions:48" x 80" x 120", Weight: 0.3 Kg.
Installation Method:DIN35 linear guide installation.
Cautionary Notes
When using contact-type temperature sensing installation, the product should be tightly pressed against the installation surface of the controlled device.
Do not crush or deform the plastic or metal housing during installation to prevent any impact on performance.
3. For metal shell products with added insulating sheaths, do not remove or crush the external insulating sleeve during installation, as this may cause leakage and compromise safety. Ensure usage safety at all times.
For use in circuits with currents not exceeding 5A, copper-core wires with a cross-sectional area of 0.4-0.75 mm² should be selected for connection.
Product should be stored in a well-ventilated, clean, dry, and non-corrosive gas-free environment with relative humidity below 90% and ambient temperature below 40°C.
The packaging contains product instructions, a certificate of conformity, and a product circuit diagram.
INT69 Heat Protector Main Performance Description:
Sensor Power Supply:
SensorDC 12V powered.
Power supply transformer isolation.
Signal Input:
Overtemperature Signal for Winding: Motor Winding Overtemperature Protection.
Input Difference Control:±2% 。
Signal Input:DC12V switch quantity signal input or resistance, current signal input.
Signal Response Speed:10mS。
Signal Output：
Relay Output Contact Capacity:5A/250VAC or 5A/30VDC.
Winding Fault Output: One set of relays has normally open outputs, and another set has normally closed outputs.
Power and Fault Indicators: Power Indicator (Green) Light.
Winding Fault Indicator (Red) Light.
INT69 Motor Thermal Protector
Input Voltage:AC 220V ±5%, 50Hz, rated power consumption less than 5W.
Ambient Temperature:-20℃～75℃。
Ambient Humidity:Less than 90% (no dew condensation).
Dimensions:48" x 80" x 120", weight: 0.3 Kg.
Installation Method:DIN35 Track Installation
Cautionary Notes
When using contact-type temperature sensing installation, ensure the product is tightly adhered to the installation surface of the controlled device.
Do not crush or deform the plastic or metal housing during installation to prevent any impact on performance.
3. For metal shell products with additional insulating sleeves, do not remove or crush the external insulating sleeve during installation, to prevent leakage and ensure safe use.
When used in circuits with currents not exceeding 5A, it is recommended to connect with copper-core wires with a cross-sectional area of 0.4-0.75 mm².
5. Products should be stored in a well-ventilated, clean, dry area with relative humidity below 90% and environmental temperature below 40°C, free from corrosive gases.
Cardboard packaging, containing product manual, certification of conformity, and product circuit diagram.
