QJB0.37/6-220/3-980S Submersible Mixing Pump, Suspended Installation

1.1 Equipment Name: Submersible Agitator

1.2 Model Number:QJB1.5/6-260/3-980；  

1.3 Key Technical Parameters

Diving Submersible Usage Conditions

   Submersible mixers can operate normally under the following conditions:24Continuous Operation for Hours

　（1Ambient Temperature:No Chinese content provided.Low:-6 ℃，Please provide the Chinese content that needs to be translated into American English.High:40℃；

　（2Ambient Humidity:No Chinese content provided for translation.No Chinese content provided, please provide the news content to be translated.70%、Please provide the Chinese content you would like translated into American English.No Chinese content provided, so nothing to translate.50%；

　（3MediaPHValue Range:5.5-9；

　（4Medium density does not exceed1150kg/m3；

　（5Diving depth not exceeding20m；

Technical Performance

  （1）DivingThe mixer's rated capacity is based on continuous operation.S1Continuous fixed quota based on XXX.

　（2）DivingThe mixer operates smoothly and effortlessly, free from any jamming or sticking.

　（3）DivingMixers withstand pressure no less than0.2MPaPlease provide the Chinese content to be translated.3A minute air pressure test without any leakage.

　（4）DivingThe mixer incorporates a double mechanical seal structure and lip seal arrangement.Tungsten carbide material.

　（5）DivingThe mixer's lead cable is usedGB5013.4As stipulated in the Chinese regulation.YZWTypical cable length for rubber sleeve cables or equivalent cables with similar performance is standard.10mThe cable sealing heads are treated with a special sulfurizing process, allowing for easy replacement and effective sealing.

　（6）DivingThe stainless steel part of the mixer features a glossy surface, free from any stains, dings, or cracks.

　（7）Duwan Environmental ProtectionQJBDivingThe mixing oil room is equipped with a sealed leakage protection device.

　（8）DivingThe mixer features a detailed red rotating mark.

　（9）DivingDual-color wire (yellow) extracted from the mixer's power cable/The specification is for grounding wire, ensuring reliable connection. The grounding symbol is prominent and not easily worn off during use.

　（10）DivingThe mixer blades and rotors undergo dynamic balance testing, with a balancing accuracy ofG6.3；

Duwan Environmental QJB Submersible AgitatorStructural Design：

Duwan Environmental Duwan Environmental DivingThe mixer is an overall design with a sealed connection and submersible type. All components of the mixer, including the motor, can operate continuously underwater. All exposed nuts, bolts, and washers are made of stainless steel. The oil chamber cover is made of corrosion-resistant synthetic material.

  （1Terminal Box

The junction box is made of stainless steel and is fully enclosed, providing complete isolation from surrounding liquids and motor parts; the cable is a specially processed sealed waterproof cable.

  （2Mechanical Seal

The shaft seal features a two-segment independent mechanical seal structure, with the sealing friction material made of corrosion-resistant sintered tungsten carbide./Silicon carbide, running sealed within an oil cavity, with an ample oil supply and space, can lubricate the overlapping sealing surfaces at a stable flow rate. The external mechanical seal is made of corrosion-resistant sintered tungsten carbide./Silicon carbide, to prevent the slurry from entering the oil cavity. Internal mechanical seal made of silicon carbide./Silicon carbide, prevents oil from the cavity entering the motor. The internal and external mechanical seals operate independently.

Static Sealing SolutionOO-Ring Sealing, material: Fluororubber.

　（3Bearings

The motor shaft is equipped with a deep groove ball bearing and a double-row angular contact ball bearing; all bearings are maintenance-free imported bearings.NSKOr (SKF)，Design Life Exceeds150000Hourly

　（4Motor

    The motor of the submerged mixer is a squirrel-cage induction motor, with the rated power value exceeding the expected load by at least.10%The unit is connected to the impeller through a deceleration device, with its winding having an insulation grade ofFGrade, working temperature up to155OCThere is no Chinese content provided for translation.Please provide the Chinese content you would like translated.Under heavy mixing loads, there is no risk of overload, and the motor can start up no less than every hour.15However, the intervals should be uniform. The motor is designed with a shell filled with inert gas, internally filled with inert gas.,To prevent condensation inside the motor and the intrusion of external dirt. The motor stator is securely embedded in the housing using the hot sleeve method, ensuring reliability. Under normal conditions, the motor's temperature rise does not exceed80OC，

　（5Protective Device

Leak detectors are installed in the stator cavity and oil chamber to detect both dynamic and static seal leaks, and to promptly shut off the power supply. The stator cavity leak sensor is connected to the motor terminal box via wiring.

　（6Cooling

Cooling of the motor is achieved through liquid heat conduction around the housing. The motor stator is embedded in the housing with a heat sleeve to enhance its thermal conductivity efficiency.

Duwan Environmental Submersible MixersService Life

    Duwan Environmental DivingThe mixer operates continuously, intermittently, and after a long period of shutdown under specified conditions, maintaining a smooth operation throughout the process. The average running time prior to the first failure is no less than15000Hour.

Duwan Environmental QJB Submersible AgitatorInstalled the systemNote:

（1）Jiangsu Du'anQJBSubmersible TypeThe mixer upgrade is conducted by the installation system, each unitDivingThe mixer should be equipped with an installation system, including: guide rods, support frames, boom hoists, and hand-cranked winches for lifting and lowering.

（2The installation system's guide rod can rotate horizontally around the axis of the guide rod.No Chinese content provided, so the translation remains unchanged: "较"Big Turnaround±60º；

（3Please provide the Chinese content to be translated.H>4mA support bracket needs to be added in the middle of the guide rod.

（4The support bracket and lower support are securely fastened to the pool wall and bottom using expansion bolts.

（5SpecificPool depth or other parametersOn-site survey required

（6Submersible mixers can be categorized into water-mounted and buoyant float installations.