Qujing galvanized angle iron, how much is it?
Angle iron, also known as angular plate, is a long strip of steel with two sides forming a right angle to each other. It comes in two types: equal-leg angle iron and unequal-leg angle iron. In equal-leg angle iron, both sides are of equal width. The specifications are indicated by the millimeter dimensions of width × width × thickness.

Primarily divided into equal-leg angle steel and unequal-leg angle steel, with the latter further categorized into equal-thickness unequal-leg and unequal-thickness unequal-leg types.

Angle steel specifications are indicated by the dimensions of the side length and thickness. Domestic angle steel specifications range from 2 to 20, with the number indicating the centimeters of the side length. The same number of angle steel often has 2 to 7 different thicknesses. Imported angle steel specifies the actual dimensions of both sides and the thickness, along with relevant standards. Generally, angle steel with a side length of 12.5cm or more is considered large, 12.5cm to 5cm is medium, and less than 5cm is small.
Qujing galvanized angle iron, how much is it?

Ordering angle steel for import/export generally focuses on the specifications required for use, with the steel grade corresponding to the carbon structural steel grade. Besides the specification number, angle steel does not have a specific composition or performance series.

Angle steel delivery lengths are available in fixed and multiple sizes. The fixed length options for domestic angle steel vary according to the specification number, ranging from 3~9m, 4~12m, 4~19m, and 6~19m. Japanese-made angle steel has length options from 6~15m.
How much are the galvanized angle irons in Qujing?

The cross-sectional height of unequal angle steel is calculated based on the length of the longer side of the unequal angle steel. It refers to steel with a cross-section in the shape of an angle, where the lengths of the two sides are not equal. It is one type of angle steel. The side lengths range from 25mm×16mm to 200mm×125mm. It is manufactured by hot rolling mill. The general specifications of unequal angle steel are: ∟50*32 to ∟200*125, with thickness ranging from 4 to 18mm.