Four Ping Q355E angle steel, how much is it?
Angular steel, also known as angle iron, is a long strip of steel with two sides forming a right angle to each other. It comes in equal and unequal angle steel varieties. Equal angle steel has two sides of equal width. The specifications are indicated by the millimeter measurements of width × width × thickness.

Primarily categorized into equal angle steel and unequal angle steel, with the latter further divided into equal thickness unequal angle steel and unequal thickness unequal angle steel.

Angle steel specifications are indicated by the dimensions of the side length and thickness. Domestic angle steel specifications range from 2 to 20 numbers, with the number corresponding to the centimeters of the side length. The same number of angle steel often has 2 to 7 different thicknesses. Imported angle steel specifies the actual dimensions of both sides and the thickness, along with relevant standards. Generally, angle steel with a side length of 12.5cm or more is considered large, 12.5cm to 5cm is medium, and less than 5cm is small.
What's the price of Q355E angle steel in Siping?

The ordering of import/export angle steel generally follows the specifications required in use, with the steel number corresponding to the carbon structural steel number. Additionally, angle steel does not have specific chemical compositions or performance series aside from the specification number.

Angle steel delivery lengths are available in fixed and multiple sizes. The fixed length options for domestic angle steel vary according to the specification number, ranging from 3~9m, 4~12m, 4~19m, and 6~19m. Japanese-made angle steel length options range from 6~15m.
How much for the Q355E angle steel in Siping?

The cross-sectional height of unequal angle steel is calculated based on the length of the longer side of the unequal angle steel. It refers to steel with a triangular cross-section where the two sides are of unequal lengths. It is a type of angle steel. The side lengths range from 25mm×16mm to 200mm×125mm. They are produced by hot rolling mills. Standard specifications for general unequal angle steel are: ∟50*32 to ∟200*125, with thicknesses ranging from 4 to 18mm.