In centralized heating systems, to reduce energy waste and consumption, the design of the plate heat exchanger heating system must be meticulously calculated and repeatedly verified. All heating equipment should be matched with the equipment in the boiler room and heat exchangers. Secondly, during operation, a scientifically and reasonably selected system circulation water volume should be chosen to minimize resistance losses. The boiler room should minimize unnecessary check valves to reduce heat loss caused by water circulation resistance, and the inlet and outlet pipes of the boiler should be as large as possible to reduce water circulation resistance.

2. Maintain the quality of recirculating water. The recirculating water in the plate heat exchanger heating system should be supplied according to standards, meeting the water quality standards for boiler use. Ensure the alkalinity of the recirculating water, keeping its pH between 10-12, to prevent scaling in the water supply network system. Maintain water alkalinity to prevent corrosion of the furnace tubes, thereby improving the boiler's thermal efficiency. Additionally, keep the alkalinity of the recirculating water to reduce water circulation resistance and losses.

3. Comprehensive balancing and adjustment measures for the heating system ensure heating quality, not only by maintaining the temperature of the secondary hot water output but also by guaranteeing an even heating quality for users, preventing uneven hot and cold conditions. The balance adjustment of the heating pipeline network is a crucial link in ensuring heating balance. As the distribution range of the centralized heating pipeline network is vast, the heating parameters at the beginning of the network will inevitably change, and there will be significant differences in the time of energy output. Therefore, the complexity of data collection, transmission, processing, and adjustment in the network will also increase, and traditional control methods cannot keep up with the demands of load changes. With the development of modern computer technology and communication technology, the balance adjustment of the plate-type heat exchanger heating network has been achieved.