The Extractor Concentrator is particularly suitable for industries such as food, capable of effectively extracting substances like juice thoroughly. However, to ensure the normal operation of the machine, it is crucial to operate it according to the correct methods and procedures. Only then can the machine function properly.

Proper operation procedures for extracting and concentrating units:

Before starting up, check that all equipment seals and valves are intact and leak-free, that the vacuum pump rotates smoothly and properly, that the electricals and voltage in the control box are normal, that the boiler water is filled to the top, and that the cooling water circulation is functioning correctly.

To begin the extraction process, open the lid of the extraction tank, weigh the material according to specifications and pour it into the tank. Add the appropriate amount of water or solvent, turn on the main power, activate the heating auto button, and open the cooling water to the condenser. Set the desired temperature on the temperature controller, start the hot water pump for hot water circulation. Once the target temperature is reached, you can turn on the vacuum pump. Note: Before starting the vacuum pump, first open the inlet valve and strictly avoid running it without water. Open the vacuum valve on the extraction tank to maintain a vacuum level of -0.03 to -0.04 MPa inside the tank, which increases the boiling point within and the dynamic state of the material. If the vacuum pump emits a high-pitched screech, adjust the vent valve on the pump head counterclockwise slightly. After extraction is complete, turn off the power to the hot water pump and open the venting port.

After a long-term disuse of the water ring vacuum pump, remove the motor fan cover and manually rotate the fan several times before it can be started.

Maintenance of Extraction and Concentration Unit

1. Cleaning and Storage of Utensils: Wipe cloths and buckets should be washed with detergent until the original color is visible, rinsed with drinking water until free of suds, wrung out, and then placed in the cleaning utensil room (area) to air dry naturally.

2. Upon completion of cleaning, fill out the decontamination record.

Please note: After equipment and machine maintenance, conduct a thorough inspection to ensure no parts have fallen off before proceeding with decontamination and cleaning operations.

Here is the operational procedure for the extraction concentrator. Follow the steps outlined above, and you can trust in the effectiveness of the extraction equipment while ensuring its long-term usability.