Pipe material pressure burst tester

Application Scope
　　
Used for long-term hydrostatic test and burst test of thermoplastic pipes, fittings, and composite pipes.
　　
Applicable materials include PE, PVC, PP-R, PP-B, PP-A, PE-X, PVC-U, PVC-C, and aluminum-plastic composite pipes, as well as various types of piping materials.
　　
Execution Standard
　　
GB/T6111, GB/T15560, GB/T18742.1, GB/T13663, GB/T18992.2, ISO 1167, ASTM D1598, 1599, etc.
　　
　　
　　
I. Test Host Section

Technical Specifications

Pressure Display Accuracy: 0.001 MPa

Pressure Control Accuracy: -1% ~ +2%

Operating Pressure: 0.01MPa ~ 0.3MPa, 0.4MPa ~ 10MPa, 0.4MPa ~ 25MPa.

Timer Operating Time: 1s ~ 9999h

Timer Accuracy: 1 second

Test Workstation: 1~40 optional

Product Features

Each channel displays real-time peak pressure and pressure rise curve.

Each work station has an independent control unit, ensuring no interference.

Each work station displays the testing process individually, with two curves for pressure and temperature.

Each main unit can connect to 2 constant-temperature water tank temperature signals simultaneously.

Data storage after equipment power-off, and automatic restart to continue the last test upon power return

Water filter incorporated to reduce pipeline blockage issues

Low noise, quick response, and stable pressure.

Part II: Constant Temperature Water Tank Section

Technical Specifications
1. Temperature Control Range: Room temperature - 95°C, 15°C - 95°C (optional refrigeration control system)
2. Temperature Control Accuracy: ±0.1℃
3. Uniformity of temperature field: ±0.5℃
4. Applicable Sample Range: φ16mm - φ1200mm
5. Material: Both inner lining and outer shell are made of 304 stainless steel.
Product Features
HWX250 and above models feature pneumatic opening of the water tank.
Insulation thickness not less than 80mm, with minimal temperature loss.
Overflow Device
Steam Collection Unit (Optional)
Over-temperature protection feature
Temperature control signal enters the test main unit
　　
Section 3: A-Type Clamping Jig

Technical Specifications
Jig Material: 304 Stainless Steel / Zinc-plated Carbon Steel
　　
　　
Jig specifications: φ16mm - φ2000mm
End Sealing Structure: Type A
Product Features
Pot-type sealed structure, O-ring silicone seal
Aesthetically pleasing and practical design, with a sandblasted surface finish
Large-scale fixtures are forged for sharp and non-coming-off clamping teeth.
Customizable size for water inlet thread
British standard fixtures are for forging, customizable.