In road construction, the installation of PC bricks differs from asphalt paving. PC bricks are widely used in recreational areas, such as parks and residential community leisure spots. There are also pedestrian walkways laid, whose features have been well-received and sought after by the public. What exactly are PC bricks in the construction process? This article introduces the construction steps of PC brick manufacturers.

Based on the design drawings of the user's intended area, construction lines are drawn in the PC simulated stone brick construction zone. One side leaves a border between 180-220mm, marked with a lime line.

2. Measure the slope, dig 300mm below ground level, place the sand on the base, and spread it evenly.

3. Lay a solid foundation in the construction area; only by doing so can the installation of the PC stone-like bricks proceed more smoothly.

4. Utilize materials like wooden planks or curbs to provide a solid border around the pedestrian brick area.

5. Fill the finished frame edges with some fine sand and press it flat with a flat wooden plank.

6. Then, for PC block paving, select the appropriate laying method based on the construction area and customer requirements. Begin with the longer or straighter edges, close the ends, and remember to leave some space for the edge bricks. "Especially for those who need to build corners, take careful measures to ensure adequate space is reserved."

7. Due to the discrepancies between paving bricks, adjustment gaps have been incorporated to enhance the overall effect.