Jianghai Pump Industry supplies hot water submersible pumps, high-temperature submersible pumps with a temperature resistance of 125 degrees Celsius, and pumps for hot water wells.All critical components are made of high-temperature and corrosion-resistant materials. They can be customized to meet the specific corrosion-resistant requirements of the customer's environment. For water with slight corrosion, a corrosion-resistant paint will be applied to the surface of the product.Flow rate up to1500Rice, flow rate up to 1 hour2000Square. Power can be achieved450KWMeets customers' various drainage and pumping capacity requirements.

Hot water submersible pump, high-temperature submersible pump with temperature resistance up to 125°C, pump for hot water wellsMotor specifications
The diving motor requires clean water lubrication; it must be filled with fresh water before use in the motor chamber (note: make sure it is fully filled, otherwise, it will reduce the motor's lifespan). If water is forgotten, the motor will burn out quickly.
Motor Protection Grade:IPX8
Power Supply
380V/  660V/1140 V /3000 V /6000 V /50HZ   If the customer requires special voltage or frequency, please inform us in advance.
Material
Impeller: Cast IronHT200 ,Or tin bronze (various grades), such as:ZCuSn3Zn8Pb6Ni1
Pump housing: Cast ironHT200   ,Or Stainless steel, such as:2Gr13 .304
Pump shaft: Cold drawn steel with chrome plating , or Stainless Steel2Gr13（1050Tempering treatment (torque enhancement)
Motor Seal: Rubber SealOFormed ring; Machinery seal .
Motor expansion regulating bladder made of rubber material.