1. Accurate display and recognition of output voltage and current values are required.
2. For DC regulated power supplies with specific output voltage and current requirements, multi-turn potentiometers and voltage/current fine-tuning potentiometers are typically used, or direct digital input can be employed.
3. The protection circuit must be comprehensive. The DC regulated power supply should not be damaged during short circuits or abnormal operating conditions, and should immediately resume normal operation after the abnormal situation is resolved.
4. The output voltage can be set and operated at any value below the rated output voltage.
5. The Taiwan-style DC power supply can automatically switch between voltage regulation and current regulation, with corresponding status indicators. Aviation ground power 2, 36V aviation power 1, 400Hz frequency converter power supply 7, 115/200V power supply 2, 27V DC power supply 5, 400Hz power supply 12, aviation power.
6. The steady current output value can be set and operated at any level below the rated output current. Check if the transformer wiring is correct. Block the slots or ventilation openings to maintain a clear air intake, ensuring the machine's own heat dissipation and normal operation. Installing an AC reactor at the input end of the variable frequency power supply and a DC reactor on the DC bus of the variable frequency power supply can improve the power factor and reduce harmonic pollution.
