Adjust the " coarse " knob first according to the required voltage, then gradually adjust the " fine " knob to achieve proper coordination. For example, when outputting 12V voltage, place the " coarse " knob on the 15V setting, then adjust the " fine " knob to 12V. The " coarse " knob should not be set to the 10V position. Otherwise, the maximum output voltage will not reach 12V.
Adjust to the required voltage before connecting the load. Aviation ground power, 36V aviation power, 400HZ variable frequency power supply, 115/200V power supply, 27V DC power supply, 400HZ power supply, aviation power supply
During operation, when it is necessary to switch to the " coarse adjustment" setting, first disconnect the load, then adjust the output voltage to the desired value before reconnecting the load.
During operation, if protection is triggered due to a load short circuit or overload, first disconnect the load, then press the "Reset" button. Alternatively, you can also restart the power supply, which will restore normal voltage operation. Reconnect the load after the fault is resolved.
