1. Display: LED display for output voltage and current (LCD display can be added upon customer request); 2. Appearance: Available in desktop, tower, or 19-inch standard sizes, suitable for combination placement on various desk tops and racks; 3. Advantages: High-frequency PWM hardware adjustment and soft-switching control technology for low power loss, low ripple, low noise, high reliability, compact size, and lightweight; 4. Constant Voltage and Current: Automatic switching between CC/CV constant voltage and current, with continuous linear adjustment of voltage and current values from zero to rated; 5. Protection Features: Overvoltage Protection (OVP), Overcurrent Protection (OCP), Overtemperature Protection (OTP), Undervoltage Protection, Overload Protection; 6. Short-circuit Characteristics: Can withstand short-circuit conditions for extended periods during operation; 7. External Compensation: Optional external compensation to reduce cable voltage drop; 8. Overvoltage Protection Setting: Output overvoltage protection value is adjustable, and after protection, the output is cut off and locked, which can be restored after the system is restarted; 9. Current Preset Function: Users can preset any required current for the load without connecting it, and when the product actually outputs current, the actual output can reach the pre-set value (optional).Aircraft Ground Power，36V Aviation Power Supply，400 Hz Frequency Conversion Power Supply，115/200V Power Supply，27V DC Power Supply，400Hz power supply，Aviation Power
10. Voltage Preset Function: Users can preset any required voltage for the load without any output voltage. When the product actually outputs voltage, the actual output can reach the preset value. (Optional) 11. Overvoltage Preset Function: The overvoltage protection value of the power supply can be preset on the panel by holding the overvoltage preset button and adjusting the overvoltage potentiometer, thus obtaining the actual required overvoltage protection value. (Optional) 12. Computer Programming Function: Optional data interfaces such as RS485/RS232/GPIB/LAN/CAN, standard Modbus or Can2.0 communication protocols, configurable computer/upper computer software for control and monitoring. Support for multi-unit networking control and master-slave parallel control. (Optional) 13. PLC Remote Sampling: Optional (Isolated/Non-isolated) 0-5V, 0-10V, 4-20mA PLC analog signal control for power supply voltage and current control and feedback; switch signal and high/low level signal for switch-on/switch-off. (Optional) 14. Programming and Storage Function: Can execute 30 sets of different voltage, current, delay time, and run time settings at one time, and can continuously loop up to 999999 times; 10 groups of memory group parameters for easy access. (Optional) 15. Timing Function: Optional timing on/off function, timing operation, or cyclic allowance. (Optional) 16. Positive/Negative Reversal Function: Provides output positive/negative reversal function (bipolar), reversal methods: manual, timing, computer programming, etc. (Optional) 17. Pulse Function: Adds a chopper circuit to the conventional DC power basic circuit, achieving independently adjustable voltage, current, frequency, and duty cycle; options include single pulse, periodic reversal pulse, positive/negative dual pulses, etc. (Optional) 18. Ammeter Installation: Wide setting range of 1—9999999 Amperes (if using the unit of Ampere-hour, divide the set value by 60); the cumulative (AH) displayed value is the sum from the date of manufacture to the time of viewing. (Optional)
