Please refer to the specifications noted on the label on the back of the machine before installation and use.
Variable frequency power supplies have different installation standards due to variations in capacity and input voltage. Please select an appropriate method for installation and wiring based on the capacity and input voltage, and pay special attention to ensuring the wire diameter complies with regulations. Aviation Power
Always triple-check the input voltage before use.
Please refer to electrical regulations when wiring. You may also consult the specifications for switches and power cables. Be mindful of the input end of the variable-frequency power supply, which should avoid sharing a switch with other equipment and should be as close as possible to the municipal power outlet.
Please use O-type terminal blocks for installation. When wiring the input and output terminal blocks, ensure the power lines are properly connected and tighten the screws to avoid poor contact and prevent electric shock incidents. 400HZ power supply.
When assembling a 50HZ/60HZ single-phase or three-phase variable frequency power supply line, it is crucial to pay attention to the correct usage of the power polarity connection.
Do not disconnect the power source when making calls, and strictly prohibit working with live wires for safety reasons.
Please pay attention to the requirements for grounding systems and strictly adhere to the relevant standards in operation.
Adjust the 10-turn output voltage knob to the low position, which is counterclockwise to the smaller position. 27V DC power supply.
