New climbing training tower model - 1. The size of the training tower window is 1.2m x 1.8m, and the distance from the window to the tower edge must be no less than 0.65m, with a window sill width of 0.35m.

Window sill thickness: 0.05 (protruding 5 cm from the tower wall), each window sill is 0.8 meters from the ground level of its respective floor, with a floor height of 3.5 meters, and should have a clear width of not less than:

Staircase with a height less than 0.9 meters, handrail tube diameter not less than 0.026 meters. Handrail height for the inner staircase is 1.1 meters. 2. On each level of the training tower, an inner handrail should be installed.

Position a platform not less than 1.5 meters wide, and a railing should be installed on the top level. 3. Install an outdoor fire escape ladder on the training tower. The ladder should extend to the top of the tower, with an appropriate width that is not too narrow.

At 50 cm. Training Tower Instructions: 1. Mainly composed of (1) simulated windows, (2) floor partitions, (3) rear supports, and (4) observation and command platform framework.

And consists of the main steel structural frame and the like. Floor partitions (steel plates) are set between the upper and lower adjacent simulated windows. 2. Below the rear part of the tower, there is a partition with the model.

Corresponding rear frame for simulated windows. 3. The simulated windows, floor partition, rear frame, and main frame are bolted together for structural integrity. 4. Each layer...

Each floor is connected by stairs. 5. The upper section of the tower is equipped with observation and command platforms.