I. Product Overview:
The A3NG series lubricating oil pump is a three-axis single-channel self-priming general-purpose pressure volumetric pump, suitable for conveying non-wearing and low-corrosive, low to high viscosity, and low to high lubricity media.
Section II: Product Uses and Features
1. Conveying lubrication, circulation, cooling, filtration, and sealing
2. Fuel-injection pressurized atomizing ignition and feeding system
3. Hydraulically tested lift brake drive control
4. Pipeline backflow unloading, oil extraction, and shipment supply
5. Long-distance multiphase mixed transportation with original gathering and boosting pressure
6. High-pressure flushing chip and屑 cutting tool cooling cycle.
7. Hopper cleaning and cargo oil measurement for loading and conveyance
8. Feeding, stripping, cargo oil loading, transfer, separation, and mixing
Section 3: Application FieldsScope：
1. Tri-screw pumps are suitable for conveying non-abrasive particles, liquids that do not chemically erode pump materials, and lubricating fluids. The conveyed media include various oils and oil-based substances.
2. Products include thermal conductive, lubricating, hydraulic oils, asphalt, lubricating greases, chemical products, and lubricating media such as paraffin, wax oil, soap, etc.
3. Used as fuel injection in heating equipment, fuel supply and transfer pumps.
4. Used in the mechanical industry for hydraulic, lubrication, and remote control motor pumps.
5. Load, transfer, and supply liquid pumps for the chemical, petrochemical, and food industries.
6. Used on vessels for conveying, boosting pressure, fuel injection, and lubricating oil pumps, as well as marine hydraulic system pumps.
4. Typical Model Representation MeaningExplanation:
A3NG-A Horizontal Three-Screw Pump
A3NG-032/048-IHOGIA-G-A
A3NG-032/064-IHOGIA-G-A
A3NG-032/083-IHOGIA-G-A
A3NG-040/056-IHOGIA-G-A
A3NG-040/068-IHOGIA-G-A
A3NG-040/080-IHOGIA-G-A
A3NG-040/104-IHOGIA-G-A
......
Here is a selection of models. For more information, please contact AKP.
FiveAdvantages and Features:
1. Modular design scheme → High interchangeability, low maintenance cost
2. Light radial wear-resistant sliding bearings → Long service life
3. High efficiency → Low operation costs.
4. Screw shaft rotor axial force balance → Bearings do not bear axial force
5. Lower axial flow rate → Excellent starting capability
6. Single shaft seal → Easy maintenance, low cost
7. Resistance to cavitation and gas bursting → Low noise, minimal vibration
8. Wide applicability of the magnetic drive, sealless, and leak-free design version
9. Availability of semi-submersible suspended and long arm designs → Customized diving depth, addressing the工况 where the pump's self-priming capability exceeds atmospheric pressure.
10. The jacketed insulation design solves the challenge of high-temperature medium transportation.
11. Various oil inlet and outlet arrangement options → Meet diverse on-site installation conditions
12. Diverse installation methods available for selection
13. Integrated Pump Liner Design Version → Enhanced Cost-Performance Experience
