I. Product Overview:
The A3NG-C series rear-in, front-out lubricating oil pump is a three-axis, single-channel self-priming general-purpose pressure volumetric pump, suitable for conveying media with low wear and corrosion, both low and high viscosity, and low to high lubricity.
Section 2: Product Usage and Features
1. Conveying lubrication circulating cooling filtration sealing
2. Fuel injection, supercharging, atomization ignition, and feeding system
3. Hydrostatic Test Drive Lift Braking Control
4. Inverted Flow Transfer, Unloading, Oil Extraction, and Shipment Supplies
5. Long-distance multiphase oil gathering, transportation, and boost compression
6. High-pressure flushing chip and屑 cutter cooling cycle.
7. Tank cleaning and cargo oil measurement for loading and transportation
8. Feed stripping, cargo oil loading transfer, separation, blending
Section 3: Application FieldsScope：
1. Tri-screw pumps are suitable for conveying non-abrasive particles, liquids that do not chemically erode pump materials, and lubricating fluids. The media transported include various oils and oil derivatives.
2. Products include thermal conductive, lubricating, hydraulic oils, asphalt, greases, chemical products, and lubricating media such as paraffin, wax oil, soap, etc.
3. Used for fuel injection in heating equipment, fuel supply and transfer pumps.
4. Used in the mechanical industry for hydraulic, lubrication, and remote control motor pumps.
5. Load, transfer, and supply liquid pumps for the chemical, petrochemical, and food industries.
6. Used on vessels for conveying, pressurizing, fuel injection, and lubricating oil pumps, as well as marine hydraulic system pumps.
4. Typical Model Representation MeaningInterpretation:
A3NG-C Series Back-to-Top Feed European Three-Screw Pump
A3NG-032/048-IFOGIA-G-C
A3NG-032/064-IFOGIA-G-C
A3NG-032/083-IFOGIA-G-C
A3NG-040/056-IFOGIA-G-C
A3NG-040/068-IFOGIA-G-C
A3NG-040/080-IFOGIA-G-C
A3NG-040/104-IFOGIA-G-C
Here's the part for this model. For more information, please contact AKP.
FiveKey Features:
1. Modular design scheme → High interchangeability, low maintenance cost
2. Light radial wear-resistant sliding bearing → Long service life
3. High Efficiency → Low Operation Costs
4. Screw rotor axial force balance → Bearings do not bear axial force
5. Lower axial flow rate → Improved start-up capability
6. Single shaft seal → Easy maintenance, low cost
7. Resistance to cavitation and gas bursting → Low noise, minimal vibration
8. Wide applicability of the magnetic drive, sealless, and leak-proof design version
9. Availability of semi-submersible suspended and long arm designs → Customized diving depth, addressing operational conditions where the pump's self-priming capability exceeds atmospheric pressure.
10. The jacketed insulation design solves the难题 of high-temperature medium transmission.
11. Various oil inlet and outlet arrangements → Suited for various on-site installation conditions
12. Diverse installation methods available for selection
13. Integrated Pump Liner Design Version → Enhanced Cost-Performance Experience
