I. Product Overview:
The SNF series flanged lubricating oil pump is a three-axis single-pass self-priming general pressure volumetric pump, suitable for conveying media that are low in wear and corrosion, with both low and high viscosity, as well as low and high lubricity.
Part II: Product Applications and Features
1. Conveying lubrication, circulating cooling, filtration, and sealing
2. Fuel injection boost atomization ignition spray feeding
3. Hydrostatic Test Drive Lift Braking Control
4. Pipeline flooding unloading, oil pumping, and shipment supply
5. Long-distance multiphase mixed oil gathering and boosting
6. High-pressure flushing chip and屑 cutter cooling cycle.
7. Tank cleaning and cargo oil measurement for loading and conveyance
8. Feedstock stripping, cargo oil loading transfer, separation, and mixing
Section 3: Application FieldsScope：
1. Tri-screw pumps are suitable for conveying non-abrasive particles, liquids that do not chemically erode pump materials, and lubricating fluids. The media transported include various oils and oil derivatives.
2. Products include thermal conductive, lubricating, hydraulic oil, asphalt, greases, chemical products, and lubricating media such as paraffin, wax oil, soap, etc.
3. Used for fuel injection in heating equipment, fuel supply and transfer pumps.
4. Used in the mechanical industry for hydraulic, lubrication, and remote control motor pumps.
5. Load, convey, and supply liquid pumps for chemical, petrochemical, and food industries.
6. Used on vessels for conveying, pressurizing, fuel injection, and lubricating oil pumps, as well as marine hydraulic system pumps.
Section 4: Meaning of Typical Model RepresentationsInterpretation:
SNF40R38U12.1W2
SNF40R38U12.1W21
SNF40R38U12.1W23
SNF80R42U12.1W2
SNF80R46U12.1W21
SNF40R54U12.1W23
......
Here is the part with model offerings. For more information, please contact AKP.
FiveAdvantages and Features:
1. Modular design scheme → High interchangeability, low maintenance cost
2. Light radial wear-resistant sliding bearing → Long service life
3. High Efficiency → Low Operating Costs
4. Screw shaft rotor axial force balance → Bearings do not bear axial force
5. Lower axial flow rate → Improved start-up capability
6. Single shaft seal → Easy maintenance, low cost
7. Resistance to cavitation and gas explosion → Low noise, minimal vibration
8. Wide applicability of the magnetic drive, sealless, and leak-proof design version
9. Availability of semi-submersible suspended and long-armed designs → Customized diving depth, addressing the operational requirements where the pump's self-priming capability exceeds atmospheric pressure.
10. The jacketed insulation design effectively solves the problem of high-temperature transmission medium.
11. Various oil inlet and outlet arrangements → Suited for diverse on-site installation conditions
12. A variety of installation methods are available for selection.
13. Integrated Pump Liner Design Version → Enhanced Cost-Performance Experience
