I. Product Overview:
The SNH series lubricating oil pumps are three-axis flow single-channel self-priming general pressure volumetric pumps, suitable for conveying media that are low in wear and corrosion, with low to high viscosity and low to high lubricity.
Section II: Product Applications and Features
1. Conveying lubrication, circulating cooling, filtration, and sealing
2. Fuel injection supercharging atomizing ignition spray feeding
3. Hydraulic Test Drive Lift Braking Control
4. Pipeline flooding loading, oil extraction, and shipment supply
5. Long-distance multiphase mixed transportation with centralized booster pressure
6. High-pressure flushing chip and chip tool cooling cycle.
7. Tank cleaning and cargo oil measurement for loading and transportation
8. Feeding, stripping, cargo oil loading, transfer, separation, and mixing
Section 3: Application FieldsScope：
1. The triple screw pump is suitable for transporting non-abrasive particles, liquids that do not chemically erode pump materials, and lubricating fluids. The media transported include various oils and oil-based substances.
2. Products include thermal conductive, lubricating, hydraulic oils, asphalt, greases, chemical products, and lubricating media such as paraffin, wax oil, soap, etc.
3. Used as fuel injection in heating equipment, fuel supply and transfer pumps.
4. Used in the machinery industry as hydraulic, lubricating, and remote control motor pumps.
5. Load, transfer, and supply liquid pumps for the chemical, petrochemical, and food industries.
6. Used on vessels for conveying, pressurizing, fuel injection, and lubricating oil pumps, as well as marine hydraulic system pumps.
4. Typical Model Representation MeaningInterpretation:
SNH40R38U12.1W2
SNH40R38U12.1W21
SNH40R38U12.1W23
SNH80R42U12.1W2
SNH80R46U12.1W21
SNH40R54U12.1W23
......
Here is the part with model listings. For more information, please contact AKP.
Five.Advantages and Features:
1. Modular design scheme → High interchangeability, low maintenance cost
2. Light radial wear-resistant sliding bearing → Long service life
3. High efficiency → Low operational costs.
4. Screw shaft rotor axial force balance → Bearings do not bear axial force
5. Lower axial flow rate → Excellent start-up capability
6. Single shaft seal → Easy maintenance, low cost
7. Resistance to cavitation and explosion → Low noise, minimal vibration
8. Wide applicability of magnetic drive, sealless, and leak-proof design version
9. Availability of semi-submersible suspended and long-arm designs → Customized diving depth to address working conditions where the pump's self-priming capacity exceeds atmospheric pressure
10. The jacketed insulation design solves the problem of high-temperature transmission medium.
11. Various oil inlet and outlet arrangements → Satisfy various on-site installation conditions
12. A variety of installation methods available for selection
13. Integrated Pump Bushing Design Version → Enhanced Cost-Performance Experience
