Glass Fiber Reinforced Plastic (GFRP)Filling MaterialThe basic components of the bracket are resin andGlass FiberIt includes fabrics, felts, etc., which are reinforced with fibers (including glass fibers, carbon fibers, organic fibers, and other metallic and non-metallic fibers) and resins (primarily epoxy resins, polyester resins, etc.).Phenolic resinFor adhesives, supplemented with other auxiliary materials.(Primary Ingredients:Molding Release Agent、Curing Agent、CatalystSealant, mold release agent,This product is made by pultrusion using UV stabilizers, mold release agents, and gel coats, etc. It boasts an array of excellent characteristics, including high temperature resistance, corrosion resistance, high strength, low density, low moisture absorption, minimal elongation, and good insulation properties.

Glass fiber reinforced molding brackets are made using specialized resins and are reinforced with added materials through the pultrusion process.*At the Thermal Power Plant CurveCooling TowerSpecific water-laying fillers. A new material that replaces cement grid boards and cast iron gratings (supports).

I. Functional Features 

　　　　Large ventilation area, low wind resistance, corrosion-resistant, and long lifespan.

　　　　2. Lightweight for easy and safe transportation of equipment.

　　　　3. Operates in working environments with self-modulating temperatures ranging from -40°C to +60°C.

II. Standardization: 

　　　　Fixed connection componentsStainless Steel BoltsPlease provide the Chinese content to be translated.U-clamps are supplied by our company as accessories.

　　　　2. On-site equipment is supervised and instructed by our staff to ensure quality standards.

Features of Glass Fiber Reinforced Poles 

Weight: 4 kg, 5% per square meter for ease of equipment and transportation.

2. Load-bearing capacity: 8 kN/㎡, damage load of 12 kN/㎡

Deflection: Under a load of 7 kN/㎡, the center deflection of the beam is 8mm after 1.25 cycles.

4. Corrosion Resistance: **Excellent rust and corrosion resistance**

Durability: 20+ years of service life

Benefits of Glass Fiber Reinforced Plastic (GFRP) Filler Holders 

Lightweight, glassSteelMaterial densityJanuary 8-9, just one quarter of cast iron for easy transportation;）

High strength, bracket bearing capacitySteel I-BeamThe longitudinal tensile and bending strength of profiles and connecting rods are approximately500 MPa, with an approximate bending elastic modulus of 300 MPa, can meet the requirements for large-scaleCooling Tower FillerSupport Requirements 

3. Corrosion-resistant, the glass fiber material is moisture-resistant and does not rust, making it suitable for widespread use in wet working environments ranging from -40℃ to 60℃.

4. Excellent planability, allowing the selection of different thicknesses of I-beam profiles based on varying support requirements, with grid spacing also customizable to meet customer needs.

Pre-construction preparations 

1. The installation of the glass-fiber reinforced grating can only be carried out after the inspection of the sprinkler structure hoisting is approved; immediately after the grating installation inspection is approved, the filling material can be installed.

2. All construction workers undergo initial and level 2 safety training, and must pass an exam before they can begin work on-site. Newcomers to the construction team receive level 3 safety training.

3. Conduct full training for all construction personnel. Physical examinations are conducted, and those found to be physically不合格 are promptly adjusted out of the construction work. Employees with myopia and other conditions affecting construction and safety are prohibited from working at heights. 

4. Construction machinery and tools, brackets, sprinkling packing, etc., have been delivered to the construction site. Please have the designated electrician attend to the installation.HoistEstablished ConnectionPower SupplyThe poles are securely mounted and surrounded by wooden planks to protect them from being pulled. 

Filler Bracket Standard: Standard hole spacing is30x25cm, thickness: 25mm, 30mm, 38mm, 50mm, 65mm. (Hole spacing can also be customized to meet customer requirements.)