Spring support hangers product storage should comply with the following requirements:

Store in a well-ventilated, dry storage room.

b. Components should be stored on shelves according to the same model and specification; when arranged on a pallet, they should be stacked neatly, and the height should not exceed 5 layers or 1 meter.

c., moisture-proof membranes should be laid on the ground, with dry wooden strips (or wooden frames, bamboo plywood, etc.) as supports. Different types of channel steel should be stacked separately; unsealed channel steel should be placed between dry wooden strips.

The channel stacking height should not be less than 1.0 meter and should be equipped with anti-overturning measures and warning signs.

Cutting rods for C-shaped steel and full-threaded bolts should comply with the following relevant regulations:

Ensure verticality of the cross-section during cutting.

When cutting with the C channel opening facing downward, cut to avoid deformation.

c. The burrs at the cutting end should be ground smooth and promptly removed, along with the iron屑 and powder that have been adsorbed.

d. Cut sections should be protected...

Construction equipment should be completed, measurement tools should be verified for certificates, and used during this period.

Before installing spring hangers, it is essential to clearly define the scope of construction project management, and the relevant research work should meet the technical development requirements of actual construction and the installation of spring hangers.