SZSW2200 Mini Explosion-proof Headlamp, Helmet Mount, Light Element Factory Z, Quality Assurance

Product is a helmet-mounted explosion-proof headlamp, with a head strap for direct wearing on the head, or placement on a safety helmet, suitable for construction sites, factories, outdoor work, network power, factory power, metallurgy, oil fields, and other industries.
Operating Environment Temperature: -20℃ to +40℃
Relative Humidity: ≤95% RH (at ambient temperature of 25℃).
Lighting Configuration: Bright, Work, Flash.

Equipped with a smooth glide slider for adjusting flood and spot lighting, catering to various working requirements.

Usage Instructions:

1.Before Use,Insert the plug of our company's* charger into the charging hole at the end of the lamp for charging. The indicator light is red during charging.,The indicator light turns green when fully charged. The charger is equipped with a built-in charging protection device; the indicator light remains green when the charger is plugged in without charging.

2.Upon use, gently press the switch button to turn on the working light. Press * twice for the bright light to illuminate, and gently press again to turn off the light source. Hold the switch for a long time to turn it off.3~5Seconds later, the light source is in a flashing state for warning and signal communication.

3.Once fully charged,3Use anytime within the month. If not in use for a long time, please charge it fully and store it. Recharge it every three months.

Cautionary Notes:

1.Please charge the lamp before use and recharge it promptly after each use.

2.Handle or transport,Ensure the button switch is protected against external pressure. To avoid excessive electricity consumption when lighting is turned on.

3.Lamps must not be struck or thrown.,In case of accidental immersion in a water-based solution, promptly remove and wipe clean.

4.Do not randomly shine the light tube directly into the eyes as intense light may harm the eyes.

5.Do not disassemble the components of the lighting fixture at will, especially the sealed components.

6.Please note the model of the charger and the specifications of the charging port when charging, and do not mix them up.