Pre-embedded pipe for landscaping lights. When wiring, a cable lower than the power distribution equipment's live wire and neutral wire should be used as the wire connection to connect the lighting fixture or tree light's plastic shell. The grounding wire connects to the system's "ground." If the wire connection length exceeds 25 meters, perform one grounding at the end, bury a galvanized flat iron 4mm x 40mm in length, and install five grounding devices. The grounding devices are made of 5×50 angle steel, 5 meters long, vertically driven into the ground, and焊接 to the galvanized flat iron at equal intervals.

2. Basic concrete pouring for lawn lights. The initial concrete pouring for lawn lights is typically handled by construction workers. However, it is crucial to ensure that the pipes for embedded components are brought out to prevent any issues with normal operation later on.

3. Install lawn lights. Open the packaging of the lawn lights and verify consistency, refer to the product manual, and assemble the lighting fixtures. The general method is to open the lampshade, install the light source and auxiliary household appliances, pull the grounding wire of the transformer out through the wiring hole to the bottom of the street lamp, then connect the lamp socket to the street lamp, making sure to tighten the screws. Next, align the flange of the lawn light with the ends of the base embedder extruder, and stand it up vertically. Then, use nuts or level the ground to secure the installation nuts.

4. Power outlet wiring. The wiring work for garden lights is best carried out by a seasoned electrician, while ensuring a reliable grounding system is in place to prevent potential hazards for future use.