Strong Magnetic Scale Remover

In hot water boiler systems and pipeline circulating cooling water systems, scale will form in the boiler body and pipelines after operation for a period of time. If not cleaned promptly, the scale layer will accumulate thicker, increasing the water resistance of the system, which may lead to burst pipes and system failure. Moreover, it will significantly increase the consumption of coal or electricity, resulting in excessive energy waste. Installing a strong magnetic scale inhibitor at the boiler inlet and strengthening the system's排污 control can effectively resolve the scaling issue: Compared to the old scale, water treated by the magnetic descaling device and boiled and circulated in the boiler for a long time will gradually soften the old scale, causing it to crack and flake off.

Scale and Lime Removal Principle:
This product features a high magnetic energy unit up to 5000-10000 GS. When water or a solution with certain electrical conductivity passes vertically through a strong magnetic field at a specific speed, it can cause electronic excitation, orient the polarized molecules of water, alter the crystalline composition of salts, enhance the polarity of microparticles, and weaken their cohesion. This results in the breaking of longer molecular chains into shorter ones in the water. Simultaneously, the deformation of charged ions disrupts the electrostatic attraction between them, preventing scaling. Additionally, due to the directional polarization of water molecules, the attraction between them and the positive and negative ions of salts increases, causing the old scale on pipes, water tanks, and boilers to gradually crack, soften, and fall off, achieving the purpose of scale prevention and removal. Once the scale is removed, it will not reform, as the process is purely physical, causing no secondary pollution. This keeps boilers and water circulation equipment clean, achieving environmental protection and energy-saving effects.

Principle of Magnetic Anti-Corrosion:
Weak induction currents are generated in the motion of strong polar molecules or ions in a magnetic field. The charges accumulate on the boiler or equipment tube walls, attracting the opposite polarity ions in magnetized water and its solutions. This creates a protective layer with the opposite charge on the boiler or equipment tube walls, protecting the inner surface from corrosion and keeping the production equipment in a brand-new working condition. (In response to this phenomenon, our company cut open pipes that have been used with our magnetization descaler for fifteen years and observed a thin red adhesive layer on the inner wall, which turned into a white powder upon drying and could be easily wiped off with a light touch).

Principle of magnetic sterilization and algae elimination:
Industrial circulating water and solutions are heated and contaminated during operation, leading to rapid bacterial growth and subsequent corrosion and odor. After magnetic energy activation treatment, the heat transfer surface of the circulating water remains free of scale, causing bacteria and algae to lose their habitat for reproduction. Continuous activation treatment by the magnetizer enriches the water with oxygen molecules, significantly increasing osmotic pressure and surface tension, rapidly killing anaerobic bacteria, causing other protoplasmic bacteria to shed flagella and rupture their cell walls, leading to death. The magnetized solution increases the oxygen content of H2O, keeping the circulating water fresh, clear, and full of vitality.