Market adaptability of pressure forming machines,砌块成型 machines have poor adaptability.
The pressure molding machine has a limited product range, primarily producing standard bricks and little else. It is unable to produce load-bearing blocks (due to production methods, market usage can be investigated), and standard bricks are merely a transitional product in today's market, not suitable for long-term development. The brick molding machine boasts strong adaptability and a diverse product line. By changing molds, it can produce over a thousand products such as wall, floor, civil, geotechnical, and decorative bricks, meeting the needs of various architectural styles and municipal engineering construction, suitable for both short-term and long-term development.
Press molding machines occupy more space, while brick-making quick molding machines take up less. Press molding machines have a slower production rhythm and lower output compared to brick-making quick molding machines. Brick-making quick molding machines have a fast production rhythm, producing 50 standard bricks every 15 seconds.
Pressure forming machine equipment has poor safety performance. The use of high-temperature and high-pressure vessels (autoclaves) can easily lead to accidents such as explosions or burns. The brick forming machine equipment is safer to use, as it does not require an autoclave and can operate with normal temperature and pressure steam, without any safety hazards.
Equipment Investment: Investment is excessive. Investment in brick forming machines is low.
The pressure forming machine meets the product strength standard (GB 10MP), but the strength is difficult to adjust, leading to over-compliance in non-load-bearing wall density. The brick forming machine meets the standards and can adjust the strength according to customer and wall design needs at any time, thereby controlling costs (strength, low cost, low cost).
The surface quality and bulk density of the pressure molding machine are excessively smooth, making it prone to cracking when using standard mortar. Due to its high density, the unit volume bulk density exceeds the standard, with the bulk density generally higher than that of fired bricks. The surface roughness of the砌快 molding machine is adjustable, suitable for standard mortar. There will be no wall cracks when using products like standard bricks and 8-hole bricks. The density is normal, and the bulk density is comparable to that of fired bricks. The pressure molding machine, which relies on pressure molding, prevents the escape of product gases, leading to internal cracks after undergoing high-temperature steam pressure curing. The 砌快 molding machine uses vibration molding, which allows for complete degassing.
The pressure forming machine has low noise levels. The brick forming machine is slightly louder, but it complies with national standards, and the noise can be controlled within normal limits by adding a noise-reduction room to the main unit. The pressure forming machine requires high-pressure steam, leading to high energy consumption. High-pressure vessel maintenance costs are high, and annual inspections by relevant departments are required. The brick forming machine uses steel trays, eliminating maintenance issues and showing minimal wear. It operates using atmospheric pressure steam, resulting in low energy consumption. (It can also be maintained without steam.)
That concludes our introduction for today. We hope it has been helpful to you. For more information, please visit our website, where we provide professional insights.
