Dual-curved mixing submersible installation
SQJB-2000 Double-Sided Curved Blender Price
Illustration of Biconical Blender Installation
Shaft Material: 304 Stainless Steel
Gearbox reducer
Impeller Diameter: 2000mm
Propeller Material: Glass Reinforced Plastic
Double curved mixer fiberglass impeller features: Long service life, not easy to break or crack, good mechanical properties.
Low-speed Submersible Propulsion Material: Blade impeller made of imported polyurethane material, motor housing cast iron.NSKBearings, custom products available upon customer's specific requirements.!The low-speed propeller is developed and manufactured by our company based on the absorption of cutting-edge technology, featuring a high technical starting point, significant energy saving, strong safety, and unique functions.
The dual-surface mixer's leak protection feature is designed to detect any water leakage inside the submersible mixer, alerting when渗水 occurs.
Leakage will trigger corresponding alarm and control signals.
Low-speed propeller motor overheating protection is specifically designed to monitor the temperature of the stator coil within the submersible mixer equipment. When the stator inside the mixer body...
In the event of abnormal temperature, the electrical control unit will emit corresponding alarm and control signals, or automatically shut off power to protect the motor stator winding.
Burnt for easy maintenance and timely handling of the submerged bi-conical mixer by staff.
Low-speed submersible mixer polyurethane impeller, low-speed submersible flow promoter polyether polyurethane impeller, low-speed flow promoter impeller, flanged polyurethane impeller
Low-speed submersible propeller impeller skeleton made of polyether polyurethane, solid copper-aluminum frame, sturdy and durable, with flange-connected large wheel hub, easy installation, not prone to breakage.
Dive Propeller Blade Diameter Size:1100mm，1400mm，1600mm,1800mm,2200mm,2500mm
Blade assembly
Note:
Before installing the submersible propeller, first select the angle adjustment blade according to the working conditions.
Ensure both blades are installed at the same angle.
Step1Loosen the hub cap1Top Cover2Screw (）3）（M16*80Left-hand thread), remove the end cap;
Step2Insert a blade into the hub's hole from above, aligning the slot of the impeller shaft outward, and adjust the selected angle of the blade.4Insert into the slot of the impeller shaft, connect with the hub using two bolts, and use a hex wrench to first tighten the bolt on the left side.5)，Then, tighten the screw on the right (6）。
To facilitate the installation of two blades, rotate the hub.180oThen, install two blades using the aforementioned method.
Step3Cap the top cover, and place the two toothed washersM16*80Left-hand threaded screws are being tightened into place.
Jiangsu Du'an Environmental Protection Double Concave Blender Matching Electrical Control Cabinet Requirements:
The on-site electrical control box is supplied as a complete set for the double curved mixer. The power and control cables from the electrical control box to the double curved mixer, as well as cable fasteners, are provided by the installation unit. The technical requirements for the control box and control are specified in the electrical and control terms.
Kitting local control box requirements:
Each dual-curvedThe mixer must have a local one-step control function for start/stop and be equipped with PLC remote control capabilities. The electrical control cabinet should at least include the following signal interfaces:
Input Signal (Passive Contact): Start/Stop Control Signal
Output Signal (Passive Contact): Manual/Automatic Signal
Operating Signal
Comprehensive fault signal.
Passive contact signal logic: All signals are positive logic signals.
Signal contact capacity: 220V, 5A.
Jiangsu Du'an Environmental Protection After-Sales Service Policy:
1: Maintenance staff should provide热情 customer service, patiently explain the cause of the failure, and promptly and accurately resolve the issue.
2: Maintenance and service costs should be charged according to regulations for malfunctions caused by the owner's actions.
3: Losses caused by improper maintenance operations shall be borne by our company.
During the warranty period, maintenance and repairs are provided free of charge according to the contract. After the warranty period expires, maintenance fees are executed as per the contract or maintenance agreement.
5. Our product warranty period is18 months, companyThe after-sales department maintains a stock of necessary spare parts for the products, ensuring normal operation of the user's equipment within 24 hours, anytime, anywhere.
6. During the engineering warranty period, any damage to equipment or components caused by installation techniques, materials, or product quality will be replaced and repaired free of charge.
7. Outside of the engineering warranty period, a reasonable cost for spare parts will be charged for any damage to equipment or components caused by installation techniques, materials, or product quality, and free services and maintenance will be provided to the customer.
