QJB3/4-1800/2-43/P Low-Speed Turbulator Quotation
Submersible Low-Speed Flow Injector Installation Diagram
Dive Propulsion Device Pricing
Motor Power: 3 kW
Impeller Diameter: 1800mm
Gearbox reducer
10-meter underwater sealed cable with YCW type
Duwan Environmental QJB3/4-1800/2-43/P Submersible Turbulator Product Description
(1) Primary structural and performance requirements
Jiangsu Du'an Environmental Low-SpeedSubmersible propellers are applied in hydrolysis and acidification ponds for horizontal flow. The propeller should be capable of continuous operation, intermittent operation, and resuming operation after a long-term shutdown under fully immersed motor conditions. It must maintain stability throughout the operation process, with the horizontal flow velocity at the bottom of the pond not less than0.3 m/s。
The hydrolysis-aeration pond currently has a coupling device and guide rod for the submersible propeller.Jiangsu Du'an Environmental Protection producedSubmersible thrusters must be compatible with the existing coupling devices and rods. The thrusters are guided through the rods to the coupling devices and can automatically couple into place, securing themselves with their own weight. Simultaneously,Jiangsu Du'an Environmental Protection produces diving accessories.The propeller must be compatible with the existing submersible propeller's electrical control and protective circuitry, ensuring seamless interchangeability with the existing equipment. Suppliers are prohibited from making any modifications to the existing coupling devices, rods, electrical controls, and protective circuits, and from providing new coupling devices, rods, or equipment control boxes to replace the existing coupling devices, rods, and control boxes.
(2) Impeller
DivingLow-speed, large-blade impeller
StreamerThe blades are banana-shaped and reinforced with glass fiber-reinforced polyurethane, effectively preventing breakage; the import edge of the blades is bent backward, featuring automatic cleaning capabilities; the blades are securely fastened to the shaft with locking nuts, making them easy to remove and replace during maintenance.
(3) Shaft
Low-speed submersionPushWaterThe equipment features a two-stage helical gear reducer for deceleration. The reducer is equipped with a sealed oil cavity at the front, with the impeller shaft passing through it. The oil outlet section is sealed with a mechanical seal. The impeller and the impeller shaft are keyed and fixed at the end of the shaft, with sealing applied. A locking device must be used between the impeller and the shaft to prevent loosening during both forward and occasional reverse rotation. The motor shaft section in contact with the wastewater (between the impeller and the mechanical seal) is fitted with a shaft sleeve protection or other effective protective measures to prevent electrochemical corrosion. Design life of the reducer bearingNot less than10,000 hours.
(4) Sealed
Each unitDiving Low SpeedThe propeller features a triple-sealed structure for separating the various components of the propeller.The external seal on the impeller shaft is for the oil chamber of the shaft sealing system, and an independent two-chamber oil box for the gearbox. The three seals consist of a nitrile rubber lip seal mounted on the motor shaft, which can isolate the gearbox oil chamber from the stator chamber. The external seal on the impeller shaft is a mechanical seal containing a stationary and a forward-rotating corrosion-resistant sintered tungsten carbide (WCCR) or equivalent ring. It is designed to not damage the mechanical seal when exposed to the stirred liquid, with a design service life of not less than 30,000 hours. The seals should not require maintenance, adjustment, or be dependent on the rotation direction.
(5) Cables and cable seals
Low-speed flow inducerThe cable junction box is a complete unit with a fixed plate. At the cable entry, there are two sets of elastic bushes to ensure waterproof and submersion sealing. The cable entry features two cylindrical elastic bushes. Each bushing comes with a washer and a ring, which are designed with precise tolerances to fit the cable's outer diameter and the junction box's inner diameter. The bushes can be compressed by a sealing tube, which is secured into the cable junction box with two stainless steel screws. Instead of using torque for rotational sealing, the bushes are moved along the cable's axial direction by the interaction between the sealing tube and the ring. The junction box and motor chamber are separated by a terminal board, protecting the motor and preventing external substances from entering through the submersible agitator./Propeller top entry.
Jiangsu Du'an Environmental Low-Speed TurbulatorEach unitSubmersible mixerPropellerEach cable is equipped with a cable suspension bag, made of316 stainless steel or harder materials.
(6) DivingPropulsion protector
Thermally sensitive switches are installed in the stator winding coils of each phase of the diving propeller. The thermally sensitive switches must be equipped with...Closed at ≤70°C, open at ≥140°C. Leak sensors are installed in the submersible motor stator chamber, junction box, and agitator oil chamber of the submersible mixer/pump.
Thermosensitive switches and stator chamber leak sensors are routed through wires to the motor terminal box. The terminal box should include a terminal board, which should be elastic."O" ring and motor sealing. The junction box should be permanently fixed and connected to the cable conductors and stator input wires using a wire-tensioning rod.
The motor must be equipped with a protection device that complements the aforementioned protection, featuring the following functions: shuts off motor operation and sounds an alarm when the thermal switch is tripped; stops motor operation and sounds an alarm if moisture infiltrates the stator compartment, wiring compartment, or oil compartment.
Technical Requirements for Spare Parts Kit
Jiangsu Du'an Environmental Protection QJB3/4-1800/2-43/P Low-Speed TurbulatorThe supplied spare parts should be compatible with the supplied propeller. The kit includes mechanical seals used for the diving propeller.O-ring, cable entry seal for junction box, bearing. The supplied goods should be complete and free from defects, and the material used should comply with specifications.
Submersible Mixers, Submersible Flow Pumps, Submersible Aeration MachinesSubmersible pumps operate underwater for extended periods, with safety, reliability, and long-term performance being their key technical indicators. The cable sealing is a critical factor in ensuring the safe and reliable operation of submersible mixers. Therefore, our company has conducted in-depth research and extensive testing on cable sealing and fixing devices, successfully developing a water-tight submersible mixer cable, which fundamentally resolves the隐患 of submersible motor failures caused by cable damage and sealing failure.
Jiangsu Du'an Environmental Protection Quality Inspection System:
Jiangsu Du'an Environmental ProtectionWe have an independent quality inspection agency with the authority to reject quality issues. During the inspection process, inspectors enhance"Triple Inspection" is conducted strictly according to the "Product Surveillance and Measurement Control Procedure," the "Control Procedure for Surveillance and Measurement Devices," and the drawings, along with various inspection specifications. The "Non-Conforming Product Control Procedure" is followed to enhance control over non-conforming products, ensuring they do not enter the next process. Quality control points are established at critical processes, such as pressure tests, rotor and impeller dynamic balancing, and assembly of bearings and mechanical seals, to strengthen quality control and ensure stability.
Conduct product quality supervision and inspection, on-site management checks, and process discipline inspections in quality management. Implement a system for compensation of quality accidents and losses. Regularly organize technical training, quality education, and assessments for operators and inspectors to ensure workers possess adequate technical qualifications and operational skills, while enhancing their quality awareness.
