QJB4/4-1800/2-56/P Low-Flow Impeller with Field Control Cabinet
Installation Method for Submersible Low-Speed Flow Generator
Stainless Steel Diving Propulsion price
Jiangsu Du'an Environmental Protection QJB4/4-1800/2-56/PLow-speed mixers are suitable for various water treatment processes and industrial applications that require uniform mixing of solid-liquid or solid-liquid-gas three-phase media. They are mainly composed of submersible motors, reducers, spiral propeller blades, seals, hand-cranked winch mechanisms, installation systems, and electrical control devices.
QJBLow-speed Turbulator Model Description
QJB------Low-speed Thruster (Submersible Propeller)
1.5-----Motor PowerKW）
4-----Motor grade
42-----Impeller Diametermm）
2-----Leaf count
1800-----Rated Revolutionsr/min)
S/P-----Material:SRepresent stainless steel,PRepresent Polyurethane
QJBApplications and Applicable Conditions of Low-Speed Turbulators
Low-speed mixers are suitable for various water treatment processes and industrial applications where uniform mixing of solid-liquid or solid-liquid-gas three-phase media is required to maintain a stable reaction.
QJBLow-speed flow controllers can operate continuously under the following conditions:
1Medium temperature not exceeding40°C
2MediumPHValue at5-9
3Medium density not exceeding115KG/M^3
4Low-speed flow controllers operate submerged for extended periods, typically not exceeding a depth of10Rice
Duwan Environmental QJB4/4-1800/2-56/P Submersible Propeller Pump Outdoor Control Box, Button Box:
AccessoryOutdoor control box, button box should withstand climatic conditions, suitable for continuous operation in outdoor corrosive environments. The box should have sufficient space for cable entry and exit, and be equipped with fixing devices and fillers. All circuit breakers, switches, starters, isolation equipment, etc., should be installed on the base plate, connected with busbars, and accessible for maintenance on the front. The box is made of stainless steel 304, with a color of RAL7035 light gray. It should meet the requirements of IEC standards. The protection class should not be less than IP55.
The rotating panel is equipped with manual control buttons, a switch, and indicator lights. The box should be supplied with necessary electrical components (such as incoming line switches, starters, and protective devices), cable in and out lines, and grounding terminals. Knockout holes for cable entry and exit are provided at the bottom of the box. The contractor shall submit all the wiring hole locations that are connected to the civil construction. Each outdoor control box and electrical control box should be equipped with installation brackets, trays, and accessories suitable for the operating height.
Jiangsu Du'an Environmental Protection Submersible Pump Wire Connection Method:
Four-core wire: The three thicker cores are for the three-phase power lines, and the single core with yellow/green dual color is the ground wire.
Five-core wire: Three cores are thick wires for the three-phase power line, one core wire is yellow/green dual-color for the ground wire, and one core wire is the 31# wire (motor leakage signal wire).
Seven-core wire: The three-core thick wire is the three-phase power line, the single-core wire with yellow/green dual color is the ground wire, the single-core wire is the 31# wire (motor leakage signal wire), and the other two cores are the 11# and 12# wires (motor overheating protection signal wires).
Jiangsu Du'an Environmental Protection Low-Speed Turbulator with 304 Stainless Steel Control Cabinet, outdoor rainproof installation, with column, single control, direct start, Chint components, equipped with LB-05 Leak Protection and INT69 Motor Overheat Protection, signals will be transmitted to the control cabinet in case of motor leakage, seepage, overheating, or overload, automatically cutting off power to stop operation, effectively protecting the submersible turbulator.
