QJB0.37/6-220/3-980S High-Speed Submersible Agitator, Jiangsu Du'an Environmental Protection
Duwan Environmental DivingThe agitator is a submersible, horizontally mounted type. The submersible agitator should be capable of up and down movement, easy to relocate, and should allow for easy disassembly for inspection or maintenance without the need for personnel to enter the pool or well.
Submersible mixers should be a complete set, including the installation system and lifting device. The installation system should consist of square steel guide rods, lifting jib, lifting chain, rotating control handle, etc., allowing for free adjustment of the mixer's lifting and lowering, and the mixer can be disassembled and installed without emptying the pool. By rotating the control handle, the support can be adjusted horizontally Adjust every 10 degrees between 0-180 degrees. The stirrer is mounted on a sliding bracket that can move along the guide rod, serving as a whole unit. The bracket must be able to bear the entire weight of the stirrer and all the thrust it generates.
The lifting device should be rotatable, and the hoisting frame's mounting device should be installed on the top support of the installation system, including a matching hoisting bucket. Each submersible mixer is equipped with a hoisting frame.
Use stainless steel hoisting chains to lift the agitator, and provide cable net sleeves as accessories to prevent cable damage caused by fluctuations in the agitated water flow.
Lifting arms equipped with mounting brackets and hoisting devices should be provided. AISI 304 stainless steel material. The lifting chain should be made of AISI 304 stainless steel. Bolts, nuts, washers, rotating handle, and anchor bolts should also be supplied as a set. The installation of anchor bolts must use chemical bolts to ensure a firm and durable installation of the agitator system, expansion bolts are not allowed.
Submersible mixers should be capable of adapting to the corrosive environment of municipal sewage. They must be able to mix the flow of sewage or sludge, ensuring bottom velocity (from the bottom of the pool) 300mm diameter (minimum) at a speed of no less than 0.3 m/s. The agitator should operate continuously under full immersion conditions. It should also be capable of both continuous and intermittent operation (every hour).Please provide the Chinese content to be translated.Multiple startup attempts should be achievableOperation status after 20 cycles and recovery from long-term shutdown.
Jiangsu Du'an Environmental ProtectionQJBDivingBlender
Jiangsu Du'an Environmental Protection Submerged AgitatorDesign, manufacturing, and factory testing technical requirements.
General Principles: Standardized appearance, operation, maintenance, spare parts, and manufacturer's services; the equipment provided must be a product of the manufacturer.
Specs and supply requirements
Diving Propulsion DeviceDivingThe blender comes as a complete set, including a full submersible motor; protective components such as motor leakage and overheat protection; motor mounting bracket, limit fixing chain, guide rail, fasteners, lifting葫芦, and water surface lifting device, etc.10-meter underwater cable; all necessary accessories for efficient, safe operation and installation.
The power and control cables (including underwater cables) between the control cabinets (or wiring cabinets) equipped with mechanical equipment and the controlled equipment they operate.Jiangsu Du'an Environmental ProtectionMain unit matching supply, with the length to be determined by the bidder according to the bidding drawings, and must meet the engineering requirements.
Jiangsu Du'an Environmental Protection QJB0.37/6-220/3-980S SubmersibleBlenderFor the complete set of equipment, including a submersible motor, impeller, sealing mechanism, reducer, lifting mechanism (comprising a limit frame, support frame, base, lifting frame, lifting ring, guide rail, lifting rope, and hand-cranked lifting frame), electrical control (including a comprehensive protector and underwater cables), and installation accessories, the base is fixed on the pre-buried iron in the civil construction (material type:SU304）The underwater section includes guide rods, support frames, limit frames, and mounts, etc.Parts are usedSU304The水上section includes lifting frames and lifting chain links.Steering wheelPlease wait.Parts are usedSU304，AllAll fasteners are made ofSU304。
.jpg)
