Self-adhesive labelsThe advantages of paper and traditional label paper include no need for glue, paste, or water, no environmental pollution, and significantly reduced time spent on labeling. They are more time and labor-saving across various applications.Dry Adhesive LabelsPaper is a type of raw material, also known as self-adhesive label raw material. It is a composite material made of printing paper, plastic film, or other materials as the base.Adhesive StickerThe paper is coated with an adhesive on the back, and it serves as a glossy paper with silicon protective paper. After the production processes such as packaging printing and film cutting are resolved, it becomes the finished product's label. There are various causes for the misalignment of the paper feeding, so it's essential to start with a careful observation. Determine where the adhesive labels are gradually misaligned on the printing paper.Self-adhesive stickersNext, adjustments were made sequentially according to the paper feed order.Adhesive Label Manufacturer。

Self-adhesive Printing

1. Examine the smoothness and tightness of the paper stack to check for uneven thickness, indentation marks, and deformation in the printing paper itself.Self-adhesive labelsInequality in tension causing uneven paper stacks is addressed by appropriately tapping and loosening the piles based on existing issues, thus preventing paper misalignment due to delayed absorption and delivery on one side of the printing paper.

2. Check for any adhesions on the four sides of the paper pile and verify the operability of the pressure block at the trailing end, ensuring it can roll freely left and right.Self-adhesive stickersWhether the cardboard back is too tight, it is beneficial to adopt certain reasonable countermeasures such as loosening the paper edges, cleaning off attachments, adjusting the paper block or the back cardboard block for regulation.Adhesive Label Manufacturer.

3. Check the stability of the paper feeding vacuum suction cup adjustment and movement, and whether the amount is consistent.Self-adhesive stickersPre-fabricated components facilitate adjustments for the paper feeding vacuum cups and the removal of paper jams and other debris.

4. Check the tension level of the paper feed belt.Self-adhesive labelsIs the belt connector smooth, are the roller working pressure dimensions suitable, is the paper guide plate too low in blocking the paper, are there any dirty substances on the paper feeding plate (such as loose screws), is the side gauge operating normally, which is conducive to making corresponding adjustments.

5. Check if the lifting and lowering time, working pressure, and size of the leading paper roller are the same, as well as the operational flexibility of the roller's rotation, and make corresponding adjustments for any existing issues.Adhesive Label Manufacturer。