UtilizePneumatic ToolsPrior to operation, pay attention to the pressure requirements of pneumatic tools; avoid both excessive and insufficient pressure. Confirm the intake connector and secure the air tube before commencing normal operation.
Keep the air compressor dry. If water is sprayed out during operation, shut off the air compressor and drain the accumulated water from the air storage bottle.
3. Avoid using quick-connects on pneumatic tools; do not wear gloves, scarves, or loose clothing while operating; especially when using an air drill, maintain a safe distance from the tool to prevent injury from being caught in the rotating mechanism.
4. Absolutely no contact with the shaft or any other part of the body to prevent accidents.
5. If the tool is too noisy or there's excessive smoke and dust, please wear earplugs and a mask promptly.
6. Do not modify pneumatic tools or replace tool parts at will.
7. Absolutely no items should be placed on the air hose to prevent irregular air supply or potential hose burst; after completing the task, add a few drops of pneumatic tool oil into the tool, let it run for a few seconds, close the main gas valve, remove the pneumatic tool, and it's a great assistant for tool cleaning and repair.