Monitor Control Console Specifications, Technical Parameters, and Principle Introduction

Control panel parameters and specifications, providing a vivid description of the detailed situation of the control panel. Industry professionals can immediately understand the specifics of the finished product just by looking at these data. These parameters and specifications of the control panel include:

One, the length, width, and height of the control console

This is the most basic manifestation of the control console, which is the size of the console!

Section Two: Types of Control Panels

There are several types of operator consoles, including standard and non-standard ones! These include piano-style consoles, flat consoles, curved flat consoles, curved piano-style consoles, corner consoles, and more!

Section 3: The metal sheet material for the control panel

Sheet metal materials, including what types of sheet metal materials, material thickness, etc.

Four, color of the control panel

The control panel must have its own color scheme!

Five, type of operator console display

Technical Specifications Description of Monitoring Console

Material: The raw material for the console is mainly cold-rolled steel plate from Wu'an Steel.

Processing: The manufacturing process for console and operation table includes shearing, punching, bending, welding, sanding, acid pickling and phosphatizing, electrostatic spraying, and other procedures.

Spraying and Powder Coating

1. Surface treatment involves degreasing with emulsifiers and alkaline assistants, phosphating for rust removal, zinc-based film-type phosphatization and passivation, followed by powder coating. The treatment method for the inner wall of the posts is identical to the surface treatment, achieving the following standards: gloss of 10%-15%, hardness ≥0.4, press strength >4NM, adhesion not less than grade 2 (GB1720), and film thickness >20μm.

2. The surface coating is done using a state-of-the-art fully automatic spray painting line domestically, including a fully automatic nine-station immersion pretreatment system, a Swiss Jintama electrostatic powder coating system, and an electronic temperature-controlled fuel curing system. The use of these equipment eliminates human factors affecting the quality of the plastic powder, enhancing the strength, adhesion, and impact resistance of the coating film, thereby meeting the GB1732 standard for surface coating quality.

Principle of Monitoring Console

The entire cabinet is made from 1.2mm to 1.5mm SPCC steel plates, which are cut, stamped, bent, riveted, welded, polished, straightened, degreased, rust-removed, phosphatized, electrostatically sprayed, cured at high temperature, and cooled. The product is available in assembled and welded versions. The assembled version is more difficult to process but has lower transportation costs, while the welded version is easier to process but has higher transportation costs. ① The countertop height is 700mm with a deep base of 350mm. It is suitable for operators to extend their legs below the countertop while seated without risk of injury from hitting the cabinet; ② The countertop comes with a sliding keyboard drawer and pre-drilled mouse wire holes, which help maintain an orderly work surface; ③ Each cabinet is equipped with an AC cooling fan assembly (including fan, fan cover, 1-meter power cord, pre-assembled), and the rear door (lockable) has ventilation holes. This facilitates internal air circulation for cooling and easy access to the equipment inside for maintenance; ④ The bottom of the cabinet has pre-drilled holes for cable routing; ⑤ The bottom of the cabinet is equipped with an adjustable shelf and a rotating front door (lockable). The shelf is convenient for placing horizontal servers or other equipment, and the front door is easy to open for operation; ⑥ The entire cabinet is unlocked with one key; ⑦ The top of the cabinet (excluding the platform style) has a sloping first layer at a 105-degree angle to the countertop, and 90 degrees from the second layer onwards. This helps prevent eye strain for operators who are viewing screens for extended periods; ⑧ The top of the cabinet (excluding the platform style) is equipped with an adjustable display shelf and a removable front panel. The front panel allows for replacing the display without changing the entire cabinet; ⑨ The countertop and cabinet are combined (excluding the platform style) for easier transportation; ⑩ Colors can be customized (usually computer gray), making the entire cabinet practical and aesthetically pleasing.

Six, operation panel cutout information!

The Dashboard is a framework for storing management tools. It is defined by items in the Console Tree, which may include folders and other containers, web pages, and other management items. The Dashboard features windows that provide views of the Console Tree and the management attributes, services, and events triggered by items in the Console Tree. Below, we introduce the principles and parameters of the Dashboard operation.