Before operating the丸making machine, please read this manual in its entirety and keep it for future reference.

2. Any modification made without the approval of the authorized body that renders the丸making machine inoperable will be the sole responsibility of the user.

3. During operation, the work surface should be clear of any unrelated items. The丸making machine should be placed on a stable surface. Ensure that the power voltage is confirmed before plugging in, with the power source close to the work surface. The power outlet must have a reliable grounding wire, and it is strictly forbidden to pull the power cord forcefully to prevent accidental tipping, damage to the丸making machine, or other accidents.

After the tablet press operation is complete, please disconnect the power to the tablet press.

Do not overload the pill machine's power outlet; otherwise, it may cause a fire or damage the motor.

Do not insert foreign objects into the operating pill-making machine to prevent damage.

7. In the event of a damaged power cord (such as exposed bare wires), please promptly replace the power cord or purchase a replacement at your local office's repair department. If a switch or outlet malfunctions, cease use immediately and strictly prohibit altering the circuit for continued use. Replace it with a matching switch or outlet promptly to avoid mechanical or personal accidents.

8. Suitable for environmental temperatures ranging from -5℃ to 40℃ with relative humidity below 90%. Free from conductive dust and corrosive metal gases, installed in a well-ventilated and clean location.

When not in use, store in a reliable and clean location. Apply a small amount of clean, water-free cooking oil to the exposed parts of the pill coating machine to prevent rust formation.

After each shift, it is essential to promptly clean the internal components of the pill-making machine. When cleaning the machine, disconnect the main power source and remove the power plug to prevent personal accidents. It is strictly prohibited to wash the entire machine or the electric heater directly with water. When the machine is not in use, store it in a dry, clean, and well-ventilated area. During the operation of the electric heater, it is strictly forbidden to come into contact with water to prevent conductivity and potential electric shock accidents.