The installation location for the cabinet must have a canopy, whether it's outdoor or indoor, and the area must be flat with no vibrations. The installation can be either floor-standing or wall-mounted, and the cabinet is equipped with professional fixed installation holes. Specific parameters can be found in the attached information and the physical product. The wiring method for the product can utilize cables, and the cable structure chosen by the user can be referenced against standards and designed in conjunction with the cabinet's structure for corresponding construction.

During the product handling process, it is crucial to be cautious. Products are prohibited from being tilted excessively; the tilt angle must not exceed 10 degrees. Excessive tilt can easily damage internal components. When transporting and positioning the explosion-proof cabin, iron tools, prying, and hammering should not be used for handling, as this could directly affect the sealing integrity of our products and, in severe cases, render them unusable.

The internal components include industrial electrical equipment, touchscreens, and precision electronics. The gas source inlet requires the installation of a dryer and filter to ensure the air supply is dry and clean, as this is crucial for the longevity of our electrical equipment. Mixed types of polluted gases should not be used for the gas source to avoid potential safety hazards. During production, the pressure control components of the product are pre-adjusted; users must re-tune them based on the on-site conditions before use.