IEC62384 Testing | LCP Testing Overview

What is LCP testing? Where in Shenzhen can I get a lab to perform LCP testing reports? What is the IEC62384 standard? How much does it cost to do LCP testing? Which lab is more affordable?

How to obtain the Australian LCP certification? Where can I get the IEC/EN62384 certification done?

LCP Certification, short for Lamp Circuit Power, primarily tests the performance of LED modules.

The standard adopted is IEC 62384.

Test content includes:

Output Voltage, Current

Line Total Power

Line Power Factor

Four: Input Current

V: Exception

Six: Durability

What is LCP Testing? What are the contents of IEC 62384 Testing?

　　LCPLamp Circuit Power is the combined power consumption of a lampand its controlgear.

LED Module DC/AC Power Electronic Control Device - Performance Requirements

　　DCor AC supplied electronic control gear for LED module –Performance

　　requirements

Scope

This standard specification covers direct current below 250V and alternating current at a frequency of 50Hz/60Hz (the output frequency may differ from the supply frequency).

AC power supply below 1,000V, paired with LED modules compliant with IEC 62031

Performance requirements for control devices for LED modules. The control devices for LED modules stipulated in this standard are designed to supply a fixed voltage or

This standard also applies to non-pure constant voltage and constant current types.

Note 1: The tests in this standard are type tests and do not include tests for individual control devices during the production process.

We seek.

2. The control devices for equipment with varying output power are currently under consideration for relevant requirements.

3. Control devices that meet this standard, according to the specifications set by the manufacturer, can ensure operation within the rated range of 92% to 106%.

Operate under reduced voltage.

2. Necessary Reference Materials

When using this standard, the following referenced standards should also be consulted. The referenced standards marked with a date apply only to this version.

Please note the dated version applies the latest edition, including all additions and revisions.

　　IEC61347-2-13, Lamp controlgear – Part 2-13: Particularrequirements for d.c. or a.c.

　　suppliedelectronic gear for LED modules

　　IEC62031, LED modules for general lighting – Safetyrequirements

3. Terms Definition

This standard applies to the definitions of the following terms.

3.1 Total Circuit Power

Under the rated voltage of the control device and high-rated output load, the combination of the LED module and the control device...

Test Project:

I. Input Current (Constant Current Power Supply), Criteria: 10% of the rated value

II. Voltage: (Rated Voltage), Criteria: -10%

III. Total Power, Criteria: 10%

IV. Power Factor, Error <= -0.05