Product Categories: Damping Spring Damper, Air Spring Damper, Floating Floor Damper, Vibration Isolation Stud, Wall Vibration Damper, Ceiling Vibration Damper.
Category Introduction:
1. Wall vibration isolators consist of U-shaped frames, damping silicone layers, and screws, offering easy and quick installation. Their unique damping silicone blocks can effectively interrupt the transmission of sound bridges, particularly in venues such as factories, machine rooms, equipment areas, bars, KTVs, and lively venues where subwoofers are installed, cutting off various vibrations and sound bridges.
2. The spring ceiling damper is composed of springs, damping silicone layers, an outer frame, and suspension rods, effectively isolating the ceiling structure between the suspended ceiling and the original floor, thereby providing excellent vibration and sound insulation. The ceiling damper uses high polymer damping vibration rubber, cast from raw silicone, with a resistance to aging and damping coefficient five times greater than that of renewal rubber, offering both safety and significant low-frequency vibration and sound insulation effects.
3. The light steel studs for walls are made of high-quality steel, formed using advanced domestic equipment. The standard length of the light steel studs is 3 meters, and they are installed together with the matching stud dampers. The rubber damper utilizes the principle of soft connection through rubber clips, and is a vibration and noise isolation element made from natural silicone material, which has good elasticity and durability. The damper forms a soft connection between the light steel studs and the wall, cutting off sound transmission bridges and effectively suppressing both low and high-frequency vibrations. The suspended installation of the light steel studs for walls has a significant vibration and noise reduction effect over a wide range of interference frequencies. The damping silicone also provides vibration and noise isolation, particularly suitable for low-frequency solid sound transmission caused by wall vibrations. The product is widely used in wall vibration and noise reduction projects. The damping light steel stud structure is simple, occupies less space, distributes force evenly, has a low self-damping frequency, and excellent isolation effect, making it an ideal device for wall vibration and noise reduction.
4. The ground shock absorber serves as a "floating floor" between floors and levels, using the shock-absorbing body to reduce the vibration of structural layers, thereby improving the hazards caused by low-frequency floor vibrations. It is important to note that elastic isolation measures should also be used at the junction of the surface layer and the walls to prevent the transmission of vibration to the walls (standard sizes: 120MM x 120MM x 63MM) and can be customized according to customer requirements.
Application Scope of the Above Products: 1. Decorative and Architectural Industry: Bars, KTV rooms, recording studios, hotels, inns, villas, offices, conference rooms, studios, performance halls, apartments, cinemas, theaters, and other venues requiring vibration reduction and noise control.
Section II: Industrial Facilities, various machine rooms, equipment, pipelines, machine tools, soundproof rooms, and noise-insulated rooms
Advantages of Anti-Shock Ceiling Products:
1: The product features a lightweight and aesthetically pleasing design, a simple structure, even force distribution, low natural frequency, and excellent vibration isolation, making it an ideal vibration damping and noise reduction component for suspended vibration equipment and pipelines.
2: Ceiling sound insulation and vibration dampers are essential components for ceiling soundproofing. Their unique damping rubber blocks can interrupt the transmission of sound bridges, especially in entertainment venues with subwoofer areas, making them indispensable. Without them, no amount of soundproofing material can keep the sound confined to the private rooms. Therefore, they are the most important facilities in soundproofing projects; they can also be used as pipe hangers in pump rooms and other equipment machine rooms to control the transmission of low-frequency sounds.
The results are highly significant.
Ceiling shock absorber product applications:
Hotel, bar, lounge, karaoke, KTV, inn, guesthouse, cinema, gym, fan-coil unit, water-cooled coil, fan, fan casing, air conditioning equipment piping, pump piping, fan, air ducts, gas ducts, oil mist purifiers, large water pumps, various water pipes, and overhead equipment for dynamic vibration isolation, vibration-reducing hangers.
Suspension Ceiling Damper Installation
1. Ceiling installation
Ceiling suspended light steel keel is used together, with one end of the product connecting to the light steel keel. One end connects to the hanger (the length of the hanger can be adjusted according to actual requirements), with one product installed on each hanger, one per actual situation, and 2-3 per square meter.
2. Wall Installation
The product connects one end to the light steel stud and the other to the hanger, fixed to the stud with screws, 1 to 2 per square meter.
